BTJKQ - NIPOL NITRILE (NBR) ELASTOMERS, 1034-60
- MSDS: BTJKQ
- Manufacturer: ZEON CHEMICALS INC
- Product Name: NIPOL NITRILE (NBR) ELASTOMERS, 1034-60
- National Stock Number: 9320-00N045095
Product Identification
Product ID:NIPOL NITRILE (NBR) ELASTOMERS, 1034-60
MSDS Date:10/20/1992
FSC:9320
NIIN:00N045095
MSDS Number: BTJKQ
Responsible Party
ROLLING MEADOWS, IL 60008
US
Emergency Phone: 800-735-3388
Info Phone: 800-735-3388
Cage: 0J3F9
Contractor
Telephone: 800-735-3388/502-775-2000
Cage: 0J3F9
Ingredients
SYMPS SUCH AS COUGH, TEARING & IRRIT SHOULD
RTECS: 9999999ZZ
EXPOSURE. MFR MONITORING/SIMULATION SHOWS EXPOSURE
RTECS: 9999999ZZ
REQUIREMENTS OR EXPOSURE LIMITS. CONTACT NEHC FOR
RTECS: 9999999ZZ
EXHST HOODS, DUCTWORK & OTHER SURFS. CLEAN UP
RTECS: 9999999ZZ
ELASTOMER MAY BE HELD AT PROCESS TEMPS FOR SHORT
RTECS: 9999999ZZ
RSLT IN DECOMP. EQUIP SHOULD NOT BE SHUT DOWN FOR
RTECS: 9999999ZZ
ABNORMAL CNDTNS SUCH AS EQUIP MALFUNCTION, IMPROPER
RTECS: 9999999ZZ
DECOMP. EMPLOYEES REMOVING DECOMPOSING MATL SHOULD
RTECS: 9999999ZZ
RESPIRATORS, SUCH AS POSITIVE PRESSURE SCBA. ALWAYS
RTECS: 9999999ZZ
HANGUP/STAGNATION DURING PROCESSING MAY CAUSE
RTECS: 9999999ZZ
AVOID EXPOS, PROVIDE EMPLOYEES W/SUITABLE NIOSH/MSHA
RTECS: 9999999ZZ
MUST BE ADEQ TO MAINTAIN AMBIENT WORKPLACE ATM BELOW
RTECS: 9999999ZZ
PROVIDED TO PREVENT SIGNIFICANT EMPLOYEE EXPOSURE.
RTECS: 9999999ZZ
IN PROCESSING AREAS. DO NOT USE PROCESSING
RTECS: 9999999ZZ
ACRYLONITRILE (SARA III)
CAS: 107-13-1
RTECS: AT5250000
Fraction By Weight: <20% PPM
OSHA PEL 2 PPM;10 PPM, C, S
ACGIH TLV: 2 PPM, S
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
1,3-BUTADIENE; (BUTADIENE) (SARA III)
CAS: 106-99-0
RTECS: EI9275000
Fraction By Weight: <5% PPM
OSHA PEL 1000 PPM
ACGIH TLV: 10 PPM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ACRYLONITRILE/BUTADIENE/POLYMER
CAS: 9003-18-3
Fraction By Weight: 100%
OSHA PEL N/K
ACGIH TLV: N/K
THIS REPRESENTS HAZ TO FIREFIGHTERS.
RTECS: 9999999ZZ
COMPOUNDS, ARE NOT COMPATIBLE W/THESE
RTECS: 9999999ZZ
ALIPHATIC HYDROCARBONS. COMBUST PRODS FROM
RTECS: 9999999ZZ
BE CONSIDERED TOXIC.
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:OVEREXP IS NOT EXPECTED AT
AMBIENT TEMPS. NO ADVERSE HLTH EFTS ARE EXPECTED DURING NORMAL
PROCESSING WHEN POTNTL EXPOS ARE ELIM BY GOOD INDUS HYGIENE
PRACTICE & WELL VENTILATED CNDTNS. AT PROCES SING TEMPS, COMBINED
INGS (ELASTOMER & OTHER PROCESSING INGS) MAY EMIT FUMES & VAPS THAT
CAUSE IRRIT TO(EFTS OF OVEREXP)
Explanation of Carcinogenicity:ACRYLONITRILE AND BUTADIENE ARE PRESENT
IN CONCENTRATIONS BELOW REPORTABLE LEVELS .
Effects of Overexposure:HLTH HAZ:RESP TRACT, EYES &/OR SKIN. TYPICALLY,
THESE EFTS ARE REVERSIBLE UPON REMOVAL FROM EXPOS & NO LASTING EFTS
ARE EXPECTED. MOST IMPORTANTLY, POTNTL FOR IRRIT WILL DEPEND ON
EFTIVENESS OF EXHST VENT PROVIDED TO PROCESS AREA. OVEREXP TO
DECOMP/COMBUST PRODS WILL CAUSE IRRIT OF RESP TRACT, EYES & SKIN.
(ING 10)
Medical Cond Aggravated by Exposure:NONE KNOWN FOR PRODUCT AS
DELIVERED.
First Aid
First Aid:IF IRRIT OCCURS/PERSISTS FROM ANY RTE OF EXPOS, REMOVE
AFFECTED INDIVIDUAL FROM AREA. CALL MD. PROVIDE PROT BEFORE
ALLOWING REENTRY. INGEST:CALL MD IMMED . EYE:FLUSH W/RUNNING WATER
FOR SEVERAL MINS (AT LEAST 15 MINS) WHILE HOLDING EYELIDS OPEN.
CONSULT MD IF IRRIT PERSISTS. SKIN:REMOVE CONTAM CLTHG. WASH W/SOAP
& WATER. INHAL:REMOVE AFFECTED INDIVIDUAL TO FRESH AIR. CONSULT MD
IMMED.
Fire Fighting
Extinguishing Media:WATER, ABC DRY CHEM/PROTEIN TYPE AIR FOAMS ARE REC
MEDIA. ELASTOMERS WOULD BE CONSIDERED "ORDINARY COMBUSTS" (SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
PERS NOT PROTECTED MUST LEAVE AREA. IN ENCLSD/POORLY VENTILATED
AREAS, WEAR NIOSH/MSHA APPRVD SCBA (SUPDAT)
Unusual Fire/Explosion Hazard:MOST ORG SUBSTANCES IN FORM OF FINE
DUST/PWDR PRESENT EXPLO HAZ. TAKE PRECS IF THESE ELASTOMERS ARE
GROUND/OTHERWISE FORMED INTO FINE PWDR. HYDROGEN (SUPDAT)
Accidental Release
Spill Release Procedures:SWEEP, SHOVEL OR VACUUM CRUMBS OR CHUNKS INTO
CLOSED CONTAINERS FOR REUSE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY PLACE AWAY FROM
DIRECT LIGHT TO MAINTAIN QUALITY. IT IS USERS RESPONSIBILITY TO
FOLLOW REC PRECS OF INDIVIDUAL ADDITIVE SUPPLIERS.
Other Precautions:ELASTOMERS EMIT FUMES & VAPS WHEN HEATED TO
PROCESSING TEMPS. ALWAYS PROCESS ELASTOMERS UNDER WELL VENTILATED
CNDTNS & AVOID CONTINUED/PRLNG BRTHG OF PROCESS VAPS. CONDENSATES
MAY BE COMBUST & SHOULD BE PERIODICALLY REMOVED FROM (ING 13)
Exposure Controls
Respiratory Protection:AS SUPPLIED, RESP PROT IS NOT TYPICALLY REQD
DURING NORMAL USE & HNDLG OPERATIONS. NIOSH/MSHA APPRVD RESP PROT
MAY BE NEEDED IF PROD IS GROUND INTO FINE PWDR/DUST. ABNORMAL
CNDTNS SUCH AS EQUIP MALFUN CTION, IMPROPER EQUIP/PROCS, OR (ING
19)
Ventilation:EFTIVE LOC EXHST VENT MUST ALWAYS BE PROVIDED TO DRAW
FUMES/VAPS AWAY FROM WORKERS TO PVNT ROUTINE INHAL. VENT (ING 21)
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPVD SAFETY GLASSES OR GOGGS (FP N
Other Protective Equipment:PROTECTIVE CLOTHING SHOULD BE WORN DURING
CLEANUP OPERATIONS TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH THORO AFTER PROCESSING CMPD, ESP BEFORE
EATING, SMOKING/USING TOILET FACILITIES. DO NOT STORE/CONSUME FOOD
(ING 23)
Supplemental Safety and Health
% VOLAT:<1 (WT) (WATER VAP). EXTING MEDIA:(NFPA DEFINED CLASS A).
CARBON DIOXIDE IS GENERALLY NOT REC FOR USE ON CLASS A FIRES AS
LACK OF COOLING CAPACITY MAY RSLT IN REIGNIT. FIRE FIGHT
PROC:DURING C LEANUP IMMED AFTER FIRE AS WELL AS DURING
FIREFIGHTING OPERATIONS. EXPLO HAZ:CYANIDE GAS IS FORMED UPON
COMBUST. (ING 4)
Chemical Properties
HCC:N1
Spec Gravity:1 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:TAN TO BROWN SLAB W/MILD CHARACTERISTIC ODOR.
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
NO SPECIFIC INFO IS AVAIL, HOWEVER STRONG OXIDIZERS/REDUCING AGENTS
WHICH ARE GENERALLY NOT COMPAT W/MANY ORG (ING 5)
Stability Condition to Avoid:OVERHEATING.
Hazardous Decomposition Products:FUMES PRDCD WHEN HEATED TO DECOMP
TEMPS MAY CONTAIN:OXIDES OF CARBON, HYDROGEN CYANIDE & SM AMTS OF
AROMATIC & (ING 6)
Disposal
Waste Disposal Methods:LANDFILL OR INCINERATION I/A/W FEDERAL, STATE &
LOCAL REGULATIONS. THESE PRODUCTS ARE NOT DEFINED OR DESIGNATED AS
HAZARDOUS BY CURRENT PROVISIONS OF THE FEDERAL (EPA) RCRA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.